The Barrett Model 82A1 rifle gained worldwide popularity after pioneering the return of shoulder fired big-bore rifles for shooting enthusiasts. As a result of its unique operating cycle, the M82A1 easily fires the largest commercially available cartridge in the world, the .50 caliber. Yet, the Barrett M82A1 develops the lowest recoil force of any comparable rifle. The M82A1 operates on the short-recoil principle. Founder Ronnie Barrett designed the shoulder fired .50 caliber rifle. The recoiling barrel and bolt assembly action against innovative spring and buffer assemblies replace the sharp recoil impact with a longer-action lower recoil force. To further reduce the recoil load, the M82A1 is fitted with a dual chamber muzzle brake. The muzzle brake redirects high velocity gun gas to lower recoil by almost 70%. The net effect is a rifle with the felt recoil of a 12-gauge shotgun.
Barrett Model 95 .50 Cal
The Barrett Model 95 is a perfect rifle for the shooting enthusiasts who enjoys firing a smaller, lightweight .50 caliber rifle with emphasis on accuracy and durability. The robust bullpup design results in a compact rifle with no sacrifice on accuaracy or velocity thanks to its cryogenically treated 29-inch barrel, the same length as the Model 82A1. Recoil is reduced by the dual-chamber muzzle brake and specially designed recoil pad. The rugged 3-lug bolt of the Model 95 locks rigidly into the barrel extension to accommodate the widest variety of factory ammunition loads. The adjustable bipod may easily be detached by removing a single quick-release pin. The Model 95 is set up to mount a variety of telescopic sights and with good ammunition this combination usually produces minute of angle accuracy. The Model 95 may be disassembled for cleaning without tools.
Barrett Model 99 .50 Cal
Call for availability.
Call for availability.
The Barrett Model 99 (BIG SHOT) rifle is the latest addition to the Barrett family of .50 caliber rifles. Introduced at the 1999 S.H.O.T. Show, the extremely accurate BIG SHOT has captured the attention of long range .50 caliber shooters the world over. What makes the BIG SHOT unique is its rugged aluminum alloy receiver with cantilevered barrel and multi-lug bolt design. The interior of the 33 inch barrel is machined to the same exaction specifications of all Barrett products and inspected for dimensional compliance with state-of-the-art air gauging. The exterior of the barrel is unfluted to maximize the rigidity and therefore, the accuracy of the system. Accurate scope mounting on the BIG SHOT is facilitated by the M1913 Picatinny rail that is formed as an integral part of the receiver. This rail has become the new industry standard and allows easy removal and reattachment of scopes and minimal effect on zero. The simple, straightforward design of the BIG SHOT makes disassembly easy and maintenance a snap. Three quick release pins secure the trigger and bolt guide to the receiver. Remove these pins and the entire rifle can be easily disassembled for cleaning and lubrication. A fourth quick release pin removes the adjustable bipod to accommodate bench rest shooting.
Call for availability.
Barrett Model 99-1 .50 Cal
This variant of the Model 99 is 4 pounds lighter than the standard Model 99 due to its shorter, fluted barrel. The Model 99-1 is ideal for civilian sporting use, as well as, for law enforcement use.
Call for availability.
All firearms must be transfered to your FFL of choice.
Barrett has entered a pioneering realm with the Model M468 that utilizes the new 6.8 SPC cartridge. Performance of the 6.8 SPC far surpasses that of the 5.56 mm or 7.62 x 39 mm. This round also opens new hunting opportunities in states where the 5.56 mm is too small for larger game.
